OSD MENU 4
Auto Exposure Setup
AE SETUP - GLOBAL
BACKLIGHT | OFF |
DAY/NIGHT | AUTO |
BRIGHTNESS | 50 |
IRIS | AUTO |
SHUTTER | ESC |
AGC | MIDDLE |
SSNR | MIDDLE |
<AUTO> | |
BACK |
|
EXIT |
|
z Backlight | [OFF/WDR/BLC/HLC] or [OFF/BLC/HLC] | |
| or [ON/OFF] |
|
| Sets Backlight Compensation. If a bright | |
| backlight is present, the subjects in the | |
| picture may appear dark or as a | |
| silhouette. Backlight | compensation |
enhances objects in the center of the picture. The camera uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.
Some modles has WDR(Wide Dynamic Range) function, which are better function than BLC. HLC(High Light Compensation) function removes the high light in a limited environment such as parking garage.
z Day/Night | [AUTO/DAY/NIGHT] or |
| [AUTO1/AUTO2/DAY/NIGHT] |
| Sets Day&Night mode. |
| There are 2 AUTO modes in ⋅10 model |
| # AUTO1 Mode : The sensitivity to change |
| a mode is fixed. |
| # AUTO2 Mode : The sensitivity to change |
| Night mode to Day mode is adjustable. |
| The sensitivity range is 1~255. The higher |
| numeric value is selected, the lower |
| illumination Night mode changes to Day |
| mode at. If this is set to AUTO2 mode, |
| ACG is fixed to HIGH. |
z Brightness | [0~100] |
| Adjusts the brightness of the images. Iris, |
| The Shutter Speed and Gain are adjusted |
| automatically in correspondence with |
| each numeric value. |
37X Speed Dome Camera | 31/50 |