Getting Started

20Printing

Printing

Button Button Terminal Cover

Buttons

A/V OUT and DIGITAL Terminal

Control Dial

1.Connect the camera to a direct print compatible printer.

Slip your fingernail or the toggle on the wrist strap under the left edge of the terminal cover to open it and insert the interface cable all the way into the connector.

See the printer’s user guide for connection instructions.

Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant printers in addition to Canon-brand printers.

For detail, see the Direct Print User Guide.

2.Turn on the printer.

3.Press the camera’s button to turn on the power.

The button will light blue.

4.Use the or button to select an image to print and

press the button.

The button will blink blue and printing will start.

You can also select images by using the control dial.

After you finish printing, turn off the camera and the printer and disconnect the interface cable.

Page 22
Image 22
Canon 970 IS manual Printing, Connect the camera to a direct print compatible printer, Button will light blue