113
Advanced Shooting Functions

Saving Original Images

Not only can you save images with altered colors when shooting still
images with the Color Accent or Color Swap modes, but you can
also choose to save the original images (before the color change).
1Select [Save Original].
1.Press the button.
2.In the menu, use the or
button to select [Save Original].
2Make settings.
1.Use the or button to select
[On] or [Off].
2.Press the button.
If [Save Original] is set to [On]
- Only the transformed image displays in the LCD monitor
while shooting in the Color Accent or Color Swap mode.
- The transformed image is reviewed in the LCD monitor
after shooting in the Color Accent or Color Swap mode. If
you erase the image at this point, the original image is
erased along with the transformed image. Exercise
adequate caution before deleting a file.
- The images are numbered consecutively. The original
images are assigned the lower number and the
transformed color accent or color swap images the next
number.
- Since two images are recorded with each shot, the number
of shots remaining is approximately half the number
displayed when this function is set to [Off].