Canon 970 IS manual 211, Humidity and between the temperatures of 0 30 C 32 86 F

211

zDo not allow any metal objects such as key rings to touch the ( ) and ( ) terminals (Fig. A). To carry the battery or store it during periods of disuse, always replace the terminal cover

(Fig.B).

These conditions can damage the battery. You may be able to check the charge state depending upon how the terminal cover is attached (Fig. C, D).

Fig. A	Fig. B	Fig. C	Fig. D
		Fully Charged Battery	Used Battery

Attach it so the S is	Attach in the opposite
visible	way of Fig. C.

zYou are recommended to use it in the camera until it is depleted and to store it in an indoor location with low relative

humidity and between the temperatures of 0 – 30 °C (32 – 86 °F).

Storing a fully charged battery for long periods of time (about one year) may shorten its life cycle or affect its performance. If you do not use the battery for long periods of time, charge it fully and discharge it in the camera about once a year before returning it to storage.

zSince this is a lithium-ion battery, you need not deplete it before recharging.

zYou are advised to charge the battery on the day of use, or one

day before, to ensure a full charge.

Even charged batteries continue to discharge naturally.

zIt takes approximately 2 hours 5 minutes to fully charge the battery from a depleted state (based on Canon’s testing standards).

•Charging it within a temperature range of 5 – 40 °C (41 – 104 °F) is recommended.

•Charge times may vary according to the ambient temperature and the battery’s charge state.

Appendix