Canon 970 IS manual Edit the movie, Select Save, 132

132

2 Edit the movie.	Movie Editing Panel
1. Use the or button to select
(Cut Beginning) or	(Cut End).

2.Use the or button to specify the cut point ( ).

• While moving the cut point using the

or	button,	is displayed at
each 1 second interval (or every 15
			Movie Editing Bar
second*1 or 30 second*2 interval in

), allowing you to cut the movie at the indicated point.

*1 When the shooting interval is 1 sec.

*2 When the shooting interval is 2 sec.

•Even if you specify the cut point at a position other than , selecting will delete the beginning portion of the movie up to the point just before your specified cut point, and selecting will delete the latter portion of the movie from the point just after your specified cut point. The edited movie will be saved.

•To check a temporarily edited movie, select (Play) and press the FUNC./SET button.

•To continue editing, repeat Step 2.

•Selecting (Exit) cancels the edit and restores the movie control panel.

3 Select [Save].

1.Use the or button to select .

2.Press the button.