] Correcting Red-Eye EffectManual Correction

When the camera cannot automatically detect and correct red-eye, correct it manually.

Add a correction frame.

●In Step 3 on the previous page, select [Add Frame] and then press the m button.

Set the position and size.

●Press the opqr buttons to move the correction frame (green) to the red-eyes, then use the zoom lever to adjust its size so only the red-eyes are framed.

XThe area inside the frame will appear enlarged in the bottom right of the screen.

●When you press the mbutton, the first frame will be set (white) and a new frame will appear.

●When you have set the frame positions and sizes, press the ·button, then follow Steps 3 and 4 on the previous page.

●You can add up to 35 correction frames.

Removing Frames

•In Step 3 on the previous page, select [Remove Frame] and then press the m button.

•Press the qr buttons to select a frame, then press the m button.

•Press the · button, then follow Steps 3 and 4 on the previous page.

•Some images may not be properly corrected.

• If there is not enough free space on the memory card, red-eye cannot be corrected.

•If you repeat corrections on the same image, image quality may deteriorate.

•When [Overwrite] in Step 4 on the previous page is selected, the uncorrected image is overwritten with the corrected data, erasing the original image.

•Protected images cannot be overwritten.

106