Changing Shooting Functions

Turning off the AF-Assist Beam

When the camera has focusing difficulties while you press the shutter button halfway, the AF-assist Beam will automatically light to assist focusing. You can turn off this function.

●Select [AF-assist Beam], then press the qr buttons to select [Off].

Displaying the Overlay

You can display grid lines for vertical and horizontal guidance, or 3:2 guide to confirm the printable area for L size or postcard size prints.

●Select [Disp. Overlay], then press the qr buttons to select a setting.

●[Grid Lines]: A grid overlays the display.

[3:2 Guide]: The areas outside the 3:2 range are grayed out.

These areas will not print when printing on paper of 3:2 aspect ratio.

• In , and modes, you cannot set [3:2 Guide] and [Both].

• Grid lines will not be recorded on the image.

•The gray areas on the top and bottom of the screen will not be printed; however, the entire image displayed will be recorded.

123