Changing Shooting Functions

Changing the Image Stabilization (IS Mode)

●Select [IS Mode], then press the qrbuttons to select a setting.

●[Continuous]: The image stabilization is always on. You can confirm the result directly on the screen which makes it easier to check the composition or focus of the subject. [Shoot Only]: The image stabilization is only on in the moment of shooting.

[Panning]: The image stabilization only works for the effect of up and down motion. This option is recommended for shooting objects moving horizontally.

•If camera shake is too strong, fix the camera to a tripod. When you

attach the camera to a tripod, you are recommended to set [IS Mode] to [Off] to shoot.

•When using [Panning], make sure to hold the camera horizontally. The Image Stabilization does not work when the camera is held vertically.

Registering Functions to the c Button

●Select [Set c button], then press the m button.

●Press the opqr buttons to select the functions to register, then press the mbutton.

●When you press the cbutton, you can use the registered function or display the setting screen for the selected function.

• Select

if you want to cancel a function.

• When this

symbol is shown on the bottom right of an icon, the

function cannot be used in the current shooting mode.

•In , each press of the cbutton records white balance data (p. 73), and the white balance settings also change to .

124