129
Connecting
2Turn the camera’s mode dial to .
The LCD monitor displays in replay mode.
When the connection to the computer is complete,
the LCD monitor turns off and the green indicator
comes on.
To disconnect the cable from the camera: Hold the cable
connector firmly at both sides and pull it straight out.
¡It is recommended to power the camera from a
household power outlet with the optional AC Adapter
Kit ACK600 when connected to a computer.
¡If you disconnect the USB cable while the camera is on,
the camera will automatically turn off.
¡If you leave the camera unused for approximately 5
minutes while it is connected the computer, the
computer screen displays a warning message. If you do
not take any action within the next minute, the camera
turns off. You can turn the camera back on by pressing
the ON/OFF button.
¡For information about what to do after making the
connection, please refer the

Software Starter Guide

.