Canon A40 quick start 139

Image too large You attempted to replay an image whose file size was too large or whose

resolution exceeded 3200 ⋅ 2400 pixels.

Incompatible	You attempted to replay an incompatible JPEG
JPEG format	file.

Corrupted data You attempted to replay an image with corrupted data.

	RAW	You attempted to replay an image recorded in
		the RAW format.
	Unidentified	You attempted to replay an image file recorded
image		in a unrecognized format (file recorded by a
		different camera in a proprietary format, etc.).

Cannot magnify! The image you attempted to magnify was recorded by another camera, or recorded in a format that cannot be magnified, or edited on a computer.

Cannot rotate! The image you attempted to rotate was recorded by another camera, or recorded in a format that cannot be rotated, or edited on a computer.

Protected!	You attempted to erase a protected image.
Too many	Too many images have been marked for
marks!	printing or transferring. Cannot process any
	more.
Cannot mark	You attempted to set the print settings for a
image	non-JPEG file.
Exx	Camera malfunction (where xx is the two-digit
	error code). Try turning the camera off and back
	on. If this message recurs frequently, note down
	the error and call a Canon Customer Support
	Help Desk. If this message appears immediately
	after you have taken a shot, it is possible that the
	camera failed to record the image—so you may
	want to switch into Replay mode to check
	whether the image was actually recorded.

Appendix

139