Canon A40 quick start 145

not recharge the batteries until the LCD monitor displays the “Change the batteries” message.

¡Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one’s skin or other dirt:

-If the battery usage time has considerably diminished

-If the number of recordable images has considerably diminished

-When charging the batteries (insert and remove the batteries two or three times before charging)

-When charging completes in a matter of a few minutes (the battery charger indicator remains lit)

¡You may not be able to fully charge the batteries due to their specifications right after purchase or after long periods of non-use. If this happens, use the batteries until their charge is depleted before charging them again. After doing this several times, battery performance will be restored.

¡If battery usage time is considerably low despite their terminals’ being wiped and the battery charger’s indicator remaining lit, it is possible that the batteries have reached the end of their lifespan. Switch to different, unused batteries. If you are purchasing new batteries, look for Canon’s AA-size NiMH batteries (four-piece set).

¡Leaving batteries in the camera or charger may damage it causing battery leakage.

Remove batteries from the camera or charger and store in a dry cool location when not in use.

¡It takes approximately 220 minutes for the charger to fully recharge the batteries (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to 104 °F).

¡Charging time varies according to ambient temperature and to the batteries’ initial charge state.

Appendix

145