
Playback
1 | $mark/%mark (A91, 120) | 9 | Clip number / Total number of clips | |
2 | Orange selection frame | 10 | Recording date (month and day only) and time | |
3 | Relay recording: Appears when a clip begins on | 11 | Special recording mode (A93) | |
114 4 | one CF card and continues on the other. (A44) | 12 | Time code of thumbnail | |
Shot mark (A90, 124) | 13 | Total recording time | ||
| 5 | Recording date and time | 14 | Embedded custom picture file (A101) |
6 | Clip name (A51) | 15 | Bit rate and resolution (A55) | |
7 | Clip thumbnail (A125) | 16 | Frame rate |
8Currently selected CF card slot (A43)
v
Switching Between the CF Card Slots
If both CF card slots contain a CF card, you can switch between them as necessary.
Operating modes:
Press the SLOT SELECT button.
• The access indicator of the selected CF card slot will illuminate in green.
Switching to Other Index Screens
All of the clips on a CF card can be accessed from the clip index screen. However, you can switch to other index screens that show only clips with an $mark ([$Mark] index screen), clips with a %mark ([%Mark] index screen), or photos* ([Photos] index screen).
* Photos are saved on the SD card.
1 Press the INDEX button.
• The index screen selection menu appears.
2 Select the desired index screen and then press SET.
•The selected index screen appears.
•Select [Cancel] instead to cancel the operation.
•Press the INDEX button again to return to the clip index screen.
Playing Back Clips
You can play back clips from the clip index screen, [$Mark] index screen and [%Mark] index screen. Use the playback control buttons on the monitor unit. When the monitor unit is not attached, you have limited playback control options (play/pause/stop only) with the buttons on the camcorder and full playback control options using the joystick and joystick guide.
1 Move the orange selection frame to the clip you want to play back.
2 Press the Òbutton to start playback.