Adding Marks while Recording

NOTES

 

• There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot

 

mark. When using the Wi-Fi Remote application, the delay may be longer depending on the conditions of the

 

wireless signal.

91

When you are using interval recording or frame recording mode, you cannot add shot marks to a clip.

When a clip contains either shot mark, !will appear next to the clip’s thumbnail in the playback index screen.

Adding an $Mark or %Mark to the Last Clip Recorded

After recording an important clip, you can add an OK mark ($) or check mark (%) to the clip to flag it and set it

apart. When the camcorder is in mode, you can display an index screen that contains only clips with an $mark or only clips with a %mark (A114). Furthermore, you can use the $mark to protect important clips, as clips with an $mark cannot be deleted.

To add an $mark or %mark to the last clip recorded in mode, you must first set in advance an assignable button to [Add $Mark] or [Add %Mark].

1Set an assignable button to [Add $Mark] or [Add %Mark] (A99).

To add both types of clip marks (to different clips), set one assignable button to [Add $Mark] and another assignable button to [Add %Mark].

2 After recording a clip, press the assignable button.

• A message indicating the clip mark will appear and the selected clip mark will be added to the clip.

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations (A47) you can set an $mark or a %mark remotely from a WiFi -enabled device using the Wi-Fi Remote application.

1After recording a clip, press [$MARK] on the Wi-Fi Remote screen to set a an $mark or [%MARK] to set a %mark.

[OK Mark] or [Check Mark] will be displayed on the Wi-Fi Remote screen and the mark will be applied to the clip.

2 Press to close the message.

NOTES

• A clip cannot have both an $mark and a %mark at the same time.