Using the Menus

Using the Menus

In mode, many of the camcorder’s functions can be adjusted from the menu for general settings, which opens after pressing the MENU button. You can also register frequently used menu settings in a customized

submenu (My Menu) for easy access. In mode, press the MENU button to open the menu for general 29 settings or SET to open the clip menu for clip operations. For details about the available menu options and

settings, refer to Menu Options (A147).

Operating modes:

CANCEL button

MENU button

Joystick

Joystick

Push the joystick to move the orange selection frame in the menu. Then, press the joystick itself or the SET button at the center of the SELE T dial to select the menu item indicated by the orange selection frame.

SET button

SELECT dial

Joystick

CANCEL button

MENU button

MENU button

Press to open the menu and then press again to close the menu after adjusting desired settings.

CANCEL button

ress to return to the previous menu or to stop some operations that are in progress.

SET button

Note that while only the joystick on the monitor unit is labeled as “SET”, all three joysticks will function as the SET button when pressed down.

SELECT dial

Turn the dial to move the orange selection frame up or down in the menu.

Selecting an Option from the Menu

The following is a step-by-step explanation of how to select an option from the menu. In the procedures throughout the rest of this manual, opening and closing the menu is assumed and not included in the procedure.

1 Press the MENU button.

•The menu opens with the orange selection frame indicating the menu item that was selected the previous time the menu was closed (unless the camcorder was turned off).

2 Push the joystick up/down or turn the SELECT dial to select the desired submenu. 3 Push the joystick right or press SET.

•The orange selection frame will appear on a menu item in the submenu.

•Press the CANCEL button, push the joystick left, or select [L] to return to the previous submenu.

4 Push the joystick up/down or turn the SELECT dial to select the desired menu item.

•If a submenu contains many menu items, a scroll bar will appear on the right side of the submenu indicating that you must scroll up or down to see other menu items.

•A Ðmark next to a menu item indicates another submenu. Repeat steps 3 and 4.

5 Push the joystick right or press SET.