Preparing the Camcorder
•As long as [~Camera Setup] >[Periph. Illum. Corr.] is set to [On], the camcorder will automatically apply the appropriate correction data.
NOTES
34• About lens correction data:
-The camcorder contains a register of correction data for compatible lenses that were available at the time the camcorder went on sale. Correction data for future lenses will be made available as part of the regular updates released for the camcorder’s firmware. For more details, visit your local Canon Web site.
-Depending on the recording conditions, noise may appear in the periphery of the image as a result of the correction.
-The level of correction will be lower for lenses that cannot provide distance information.
-The level of correction will be lower the higher the ISO speed/gain setting used.
-No correction will be applied when correction data is not available for the lens attached.
-When using
-When using
$Attaching a PL Lens
1 Set the Qswitch to OFF.
2 Hold a bayonet ring handle and turn the bayonet ring
3 Attach the lens to the camcorder aligning a groove on the lens with the PL lens index pin on the mount.
4 Turn the bayonet ring clockwise to fix the lens in place.
Attaching and Removing the Monitor Unit
You can attach the monitor unit to the accessory shoe on the camcorder or that on the handle unit. Further ahead you will find details about using the LCD panel and adjusting the LCD screen (A36).
Attaching the Monitor Unit
1 Set the Qswitch to OFF.
2 Insert the attachment base of the monitor unit to the camcorder’s or the handle unit’s accessory shoe.
• Use the attachment base at the bottom of the monitor unit to attach it directly to the camcorder. Use the attachment base at the back of monitor unit to attach it to the accessory shoe on the front of the handle unit.
3 Tighten the monitor unit’s lock screw.
4 Connect the monitor unit’s cables to the camcorder.
• Connect cable number 1 (with the white line) to the camcorder’s EXT 1 terminal and cable number 2 to the EXT 2 terminal.