Using the HD/SD SDI Terminal
The digital signal output from the HD/SD SDI terminal includes the video signal, audio signal and time code signal. If necessary, perform the following procedure to change the output to HD or SD*. Turning the output off will conserve the camcorder’s power.
Connecting to an External Monitor
[¢Video Setup]
[SDI Output]
129
* Not available for 24.00P recordings. | [HD] |
1 Open the [SDI Output] submenu.
[¢Video Setup] >[SDI Output]
2 Select the desired option and then press SET.
• If you selected [SD], you can select the SD output method (A130).
NOTES
•If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A130).
Using the HDMI OUT Terminal
The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. The output signal will automatically switch to HD or SD* depending on the capability of the external monitor.
* Not available for 24.00P recordings.
NOTES
•Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
•Video may not be output correctly depending on the monitor. In such case, use another terminal.
•If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A130).
•You can select the SD output method (A130).
Using the SYNC OUT Terminal
In addition to its function as a synchronization signal output terminal, you can use the SYNC OUT terminal also as a terminal for analog video signal output. You can output an HD component video luminance signal or a
* Not available for 24.00P recordings.
1 Open the [SYNC Output] submenu.
[¢Video Setup] >[SYNC Output]
2 Select
[¢Video Setup]
[SYNC Output]
[Composite]
•If you selected
NOTES
•When you play back a clip on a monitor with a 4:3 aspect ratio, the monitor will switch automatically to widescreen mode if it is compatible with the Video
•If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A130).