Onscreen Markers and Zebra Patterns
Grid
72
Center marker
NOTES
•If you set an assignable button to [Markers] (A99), you can press the button to turn the onscreen markers on and off.
Displaying Zebra Patterns
The camcorder has a zebra pattern feature that shows black and white diagonal stripes over areas that are overexposed. This is displayed only on the screen and will not affect your recordings. There are two types of zebra patterns and you can display both simultaneously. Zebra 1 lets you identify areas within a certain range (±5% of a specified level) while zebra 2 lets you identify areas that are over a specified level. When you display both simultaneously and they overlap, only zebra 1 will be displayed in those areas.
1 Open the zebra pattern [Select] submenu.
[£LCD/VF Setup] >[Select] (under [Zebra])
2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press SET. 3 Open the zebra level submenu.
[£LCD/VF Setup] >[Zebra 1 Level] or [Zebra 2 Level]
4 Select a zebra level and then press SET.
5 Press the ZEBRA button to activate the selected zebra pattern.
•Alternatively, before closing the menu, you can also select [Zebra], select [On] and then press SET.
NOTES
[£LCD/VF Setup]
[Select]
(under [Zebra])
[Zebra 1]
•You can use the [£LCD/VF Setup] >[HD Output] setting to display the zebra pattern on an external monitor connected to the HD/SD SDI terminal (HD output only), SYNC OUT terminal