aLabel

CF Card Eject

Button

aInsert the CF card with its label facing towards you and close the CF card slot / battery cover.

zPush the card in until the CF card eject button fully extends. To remove the CF card, push the CF card eject button and pull the card out.

16 1. Preparing the Camera

zPlease note that CF cards formatted with other manufacturers' cameras or a computer, or formatted or edited with application programs, may slow down writing to the CF card or prevent the card from operating correctly in the camera.

zSee CF Cards and Estimated Capacities (Recordable Images) (p. 157).

zYou are recommended to use CF cards that have been formatted in your camera (p. 19). The card supplied with the camera may be used without further formatting.

ŠThis is a lithium ion battery pack so there is no need to completely use or discharge it before recharging. It can be recharged at any time.

ŠIt takes approximately 90 minutes to bring a fully discharged battery pack to full charge (based on Canon's testing standard). Charge it within a temperature range of 5 to 40 °C (41 to 104 °F).

ŠYou may hear a noise during charging. This is not a malfunction.