3Aim the camera at a white paper or cloth, or gray card and press the SET button.

The white balance data is recorded.

zAim the camera so that the white paper or cloth, or gray card, completely fills the center of the frame.

zYou can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

4Press the FUNC. button.

ŠYou are recommended to set the white balance when shooting in the following conditions.

-The shooting mode is set to and the exposure compensation and flash exposure adjustment are set to ±0. The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).

-The zoom is positioned to the telephoto end setting.

Set the digital zoom to [Off].

-A mode other than is selected.

In mode, white balance data cannot be read.

-The ISO speed is set to the same setting to shoot the image.-The flash is set to (Flash On) or (Flash Off).

Use the same flash setting as the one that will be used for shooting when you set the white balance. If the white balance setting conditions and shooting conditions are not the same, the correct white balance may not

be obtained.

When the flash is set to (Auto with red- eye reduction) or (Auto), the flash may fire while the white balance data is recorded to the custom white balance. If this happens, make sure the flash also fires when you shoot the image.

ŠThe custom white balance will not be canceled even if you reset camera settings to default (p. 71).

6.Shooting-Advanced Functions 83