a

Sequence

Sequence

c

aCompose and shoot the second image so that it overlaps the first.

zMinor discrepancies in the overlap can be corrected with the software.

z An image can be retaken. Press the W, X, S or T arrow on the omni selector to return to that frame.

zA maximum of 26 images can be recorded either horizontally or vertically.

bUse the same procedures to shoot the remaining frames.cPress the SET button after the last shot.

52 5. Useful Shooting Functions

Macro Mode

Shooting Mode Dial

Use the macro mode to shoot close-ups of subjects in the range of 4 to 44 cm (1.6 in. to

1.4ft.) at wide angle end and 30 to 44 cm (1.0 ft. to 1.4 ft.) at telephoto end.

ŠAlways use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, though, the parallax phenomenon may cause images composed with the optical viewfinder to be off-center (p. 32).

ŠWhen the lens is zoomed out to the wide angle end, the recordable area is 64 x 47 mm (2.5 in. x 1.9 in.) at the closest focal distance, and at telephoto end, it is 106 x 80 mm (4.2 in. x 3.1 in.).

ŠThe exposure may not be optimal when the flash is used in macro mode.