Setting the Date/Time

The first time the camera power is turned on or whenever the built-in rechargeable lithium battery charge is low, start from Step .

You may need to reset the date and time if the battery pack is removed for about three weeks.

ŠSetting the date and time settings does not cause the date/time stamp to appear on images. For printing images with the date on them, refer to the Direct Print User Guide or Software Starter Guide.

Charging the Date/Time Battery

ŠThe camera has a built-in rechargeable lithium battery that maintains the date, time and other camera settings. This battery recharges when the main battery pack is inserted into the camera. When you first purchase the camera, place a charged battery pack in it or use the AC Adapter Kit ACK700 (sold separately) for at least 4 hours to charge the date/time battery. It will charge even when the camera power is set to Off.

ŠIf the Set Date/Time menu appears when the camera power is turned on, it means that the date/time battery charge is depleted. Recharge it as described above.

24 1. Preparing the Camera

b

aTurn the power on (p. 21).

bPress the MENU button, and then the X arrow on the omni selector.

The [ (Set up)] menu appears.