Canon CR-55 Turning the Power ON, Turning the Power ON/OFF

4 Windows recognizes the scanner as CANON CR-55 USB and installs the device driver.

The INF file is installed by the scanning utility. The dialog box that is displayed depends on the Windows version:

Installing the Scanner

Turning the Power ON/OFF

Follow the procedures described below when turning the power ON or OFF.

Turning the Power ON

1 Turn ON your computer, Windows starts.

2 Log on as a user with Administrator privileges.

3 Turn ON the scanner.

The power switch is on the rear of the scanner.

Push the power switch to the right to turn ON the scanner. The power indicator lights green when the power is ON.

WARNING

If the scanner makes a strange noise, emits smoke or a strange odor, becomes hot, or if the scanner does not operate at all even though the power is ON, immediately turn the scanner OFF and disconnect the power cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced.

23