6 If two sheets or no sheets are fed, adjust the gap between the separation roller and feeding roller, as follows:
•If two document sheets are fed in at once, the gap between the separation roller and feeding roller is too wide. Turn the paper thickness adjustment dial clockwise in the range from 45º to 90º to narrow the gap between the separation roller and feeding roller. Then repeat steps 3 to 5 and check that feeding performs correctly.
•If no document is fed at all, the gap between the separation roller and feeding roller is too narrow. Turn the paper adjustment dial counter clockwise to widen the gap between the separation roller and feeding roller until two document pages are fed at once. Then repeat steps 3 to 5 and check that feeding performs correctly.
Paper Thickness
Adjustment Dial
7 When you have finished adjusting the separation roller gap, exit the scanning utility.
42Using the Scanner