Adjusting the Print Position
Before using the imprinter, adjust the print position.
1 Open the imprinter cover.
Print Position Adjustment Lever
Carriage
2 While squeezing in both sides of the print position adjustment lever, move the print cartridge carriage up or down to adjust the print position.
Note
You can adjust the print position by moving the print cartridge carriage up or down, so that the distance between the document bottom edge and the center of text is one of three levels: either 1.8” (43.5 mm), 1.9” (47 mm), or 2.0” (50.5 mm). (All values are approximate.)
1.7” (43.5 mm) | 1.9” (47 mm) | 2.0” (50.5 mm) |
from document | from document | from document |
bottom edge | bottom edge | bottom edge |
3 Gently close the imprinter cover.
Using the Scanner | 43 |