Message

 

Explanation

 

 

 

 

 

 

 

 

 

 

DISC ACCESS FAILURE

There was an error when reading the disc or attempting to write

130

CHECK THE DISC

onto it. Try cleaning the disc or replace it.

 

 

 

 

 

This message can also appear if condensation has formed. Wait

132

 

 

 

until the camcorder dries completely before resuming use.

 

 

 

 

 

The disc may not be loaded correctly. Try removing the disc and

 

 

 

reinserting it.

 

 

 

DISC COVER IS OPEN

Verify the disc is correctly inserted and close the disc cover.

31

NO DISC

No disc is loaded. Insert a disc.

31

 

 

 

You inserted a disc recorded in a different Television System (PAL

 

 

 

or SECAM).

 

 

 

 

 

 

This message can also appear if condensation has formed. Wait

132

 

 

 

until the camcorder dries completely before resuming use.

 

 

LOADING THE DISC

The disc is being read. Wait before you start recording.

AVOID MOVING THE

Try not to move the camcorder while the image is being recorded.

CAMCORDER

 

 

 

 

UNABLE TO RECOVER

Could not recover a corrupted file.

90

DATA

This message can also appear if condensation has formed. If you

132

 

 

 

suspect condensation is the reason, do not initialize the disc and

 

 

 

 

 

wait until the camcorder dries completely before resuming use.

 

 

DISC FULL

The disc is full (“

END” flashes on the screen). Delete some

31

 

 

 

recordings (DVD-RW in VR mode) to free some space or replace

86

 

 

 

the disc.

 

 

 

NO CARD

Memory card not is inserted into the camcorder.

30

NO IMAGES

No images are recorded on the memory card.

CARD ERROR

A memory card error occurred. The camcorder cannot record or

 

 

 

display the image.

 

 

 

 

 

The error may be temporary. If the message disappears after 4

 

 

 

 

 

seconds and “

” flashes red, turn the camcorder off, remove the

 

 

 

 

 

card and reinsert the card. If “ ” changes to green, you can

 

 

 

 

 

continue recording/playback.

 

 

CARD FULL

Memory card is full. Erase some images to free some space or

92

 

 

 

replace the memory card.

 

 

NAMING ERROR

The folder and file numbers have reached their maximum value.

 

 

 

Set the [FILE NOS.] option to [RESET] and initialize the disc or

 

 

 

 

 

memory card, erase all the images on the memory card or replace

 

 

 

 

 

the disc.

 

 

 

UNIDENTIFIABLE

The image file is corrupted or it was saved using a compression

IMAGE

method other than that compatible with this camcorder (JPEG).

 

 

 

 

TRANSFER ORDER

You attempted to set more than 998 transfer orders.

113

 

 

 

 

ERROR

 

 

 

 

TOO MANY STILL

Disconnect the USB cable and decrease the number of still

IMAGES DISCONNECT

images on the memory card or disc to less than 1800. Images

 

 

USB CABLE

cannot be erased from a DVD-R or DVD-RW disc recorded in

 

 

 

 

 

VIDEO mode.

 

 

 

 

 

 

If a dialog appeared on the computer screen, close it and then

 

 

 

 

 

reconnect the USB cable.

 

 

Direct Print Related Messages

About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual.

E

Trouble?

127