
Step 1: Preparing the Power Supply
The camcorder can be powered by a battery pack or be connected to a household power outlet. Charge the battery pack before use.
Attaching and Charging the Battery Pack
1. Turn off the camcorder. | DC IN terminal | CHARGE indicator |
Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks.
3. Connect the power cord to the adapter.4. Plug the power cord into a power outlet.5. Connect the power adapter to the camcorder’s DC IN terminal.The CHARGE indicator starts flashing. | BATT. button | |
The indicator will stay on when the | ||
| ||
charging is completed. |
| |
| Remove the battery terminal cover before | |
| attaching the battery |
Once the battery is fully charged:
1.Disconnect the power adapter from the camcorder.2.Unplug the power cord from the power outlet and the adapter.To remove the battery pack:
Hold the BATT. button pressed down to release it, and pull out the battery from the ridge on its bottom part.
E
Preparations
Attaching the Ferrite Core (Asia only)
Attach the enclosed ferrite core before you connect the
Attach the ferrite core to the cable |
|
about 7 cm from the plug end (the | 7 cm |
plug to be connected to the |
|
camcorder) of the |
|
Power Adapter. |
|
Pass the cable through the centre of the core
and wrap it around the core twice, then close the unit until it clicks shut.
21