Viewing Still Images

1. Move the power switch to ON.

2. Slide down the power switch towards MODE and release it to set the camcorder in PLAY mode ( 12).

The green PLAY indicator will turn on.

3. Move the / switch to the (Still images) position.

4. If necessary, change the media for the still images using the procedure described in the Recording Still Images section ( 36).

As long as you do not change the media selection, the camcorder will show the still images recorded on the media that was selected last.

5.Use the multi selector to move ( ) between images.

The following may not be displayed correctly: Images not recorded with this camcorder, images edited on or uploaded from a computer (except for the sample images for the Card Mix function), and images whose file names have been changed.

When the disc/card access display (“ ” or “ ”) appears on screen and when either the DISC access or CARD access indicator is on or flashing do not perform the following actions. Doing so may result in permanent data loss.

-Do not open the disc or memory card cover and do not remove the disc or memory card.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the / switch or the operating mode.

Slideshow

SLIDESHOW

( 60)

1.Press the FUNC. button.2.Use the multi selector to select () [ SLIDESHOW] and press ().3.Use the multi selector to select ( ) [START] and press ().

Press the FUNC. button to stop the slideshow.

E

Playback

Functions Basic

41