Recording reminder

The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short.

Disc operation

Record, Record pause,

Playback, Playback pause,

Fast playback,

Fast reverse playback,

Slow playback,

Slow reverse playback,

Frame advance, Frame reverse

Remaining recording time

When there is no more disc space available, “END” will be displayed and the recording will stop.

Number of still images available on the card

flashing in red: No card in green: 6 or more images

in yellow: 1 to 5 images

in red: No more images can be recorded

•When viewing the still images, the display will always be in green.

•Depending on the recording conditions, the number of still images available displayed may not decrease even after a recording has been made, or may decrease by 2 still images at once.

Card/Disc Access Display

“” is displayed next to the number of images available while the camcorder is writing on the memory card or disc.

Remaining battery charge

•When “” starts flashing in red replace the battery pack with a fully

charged one.

•When you attach an empty battery pack, the power may turn off without displaying “”.

•Depending on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately.

E

Introduction

19