
3Manual Sensor Cleaning
Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1
2 3
4
Select [Sensor cleaning].
Under the [7] tab, select [Sensor cleaning], then press <0>.
Select [Clean manually].
Turn the <5> dial to select [Clean manually], then press <0>.
Select [OK].
Turn the <5> dial to select [OK], then press <0>.
XIn a moment, the reflex mirror will lockup and the shutter will open. “CLn” will blink on the top LCD panel.
End the cleaning.
After cleaning the sensor, set the power switch to <2>.
Using the AC Adapter Kit
If you use the battery, make sure it is fully recharged.
187