wPrinting

 

4 Set the printing effects.

 

Set as necessary. If you need not set

 

any printing effects, go to step 5.

 

Turn the <5> dial to select the item

 

on the upper right, then press <0>.

 

If the <e> icon is displayed next to

 

<z>, you can also adjust the

 

printing effect (p.196).

 

Next, turn the <5> dial to select the

 

desired printing effect, then press

 

<0>.

 

 

Printing Effect

Description

 

 

EOn

The image will be printed according to the printer’s standard

colors. The image’s Exif data is used to make automatic

 

corrections.

EOff

Same as the printing characteristics turned “On”. No automatic

correction will be performed.

 

EVIVID

The image will be printed with higher saturation to produce

more vivid blues and greens.

 

ENR

The image noise is reduced before printing.

0B/W

Prints in black-and-white with true blacks.

0Cool tone Prints in black-and-white with cool, bluish blacks.

0Warm tone Prints in black-and-white with warm, yellowish blacks.

zNatural

Prints the image in the actual colors and contrast. No automatic

color adjustments are applied.

 

zNatural M

The printing characteristics are the same as the “Natural”

setting. However, this setting enables finer printing adjustments

 

than with “Natural.”

EDefault

The printing will differ depending on the printer. For details, see

the printer’s instruction manual.

 

*The screen display may differ depending on the printer.

*When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 196.

194