3Custom Function Settings
C.Fn III
During manual AF point selection, it is possible to activate the AF points surrounding the selected AF point for AF. This function works in both the
Convenient when it is difficult to track a moving subject with just one
0:Disable
1:Left/right AF point
The points on the immediate left and right (or top and bottom for a vertical shot) of the
2:Surrounding AF points
The adjacent AF points surrounding the
3:All 45 points area
In the AI Servo AF mode, the autofocus will center on the manually- selected AF point with the row of six AF points right above and below the AF point and the three AF points on the immediate left and right will also become active (total of eighteen AF points). If the subject moves to another AF point within the expanded AF points, the expanded AF will center on that AF point. Since all 45 AF points will operate, as long as the subject is within the Area AF frame, it will be focused at all times.
In the
Even when C.Fn III
If there are two
The AF point expansion centers on the selected AF point. Therefore, if a peripheral AF point is selected, the AF point expansion will be smaller as shown below.
Expanded by one AF | Expanded by one | All 45 AF points |
point on the left/right | AF point all around | can be used |
Selected AF point | Expansion points |
|
222