
3Custom Function Settings
C.Fn III
You can instantly switch to the registered AF point with <9> or the <w> button while the metering timer is active. The AF will operate when the switch is made.
0:Disable
1:Switch with <9>
By pressing <9>, you can switch to the registered AF point. Press it again to switch to the previous AF point.
2:Only while <A> is pressed
You can switch to the registered AF point only while you hold down the <A> button. When you release the <A> button, the camera will return to the original AF point.
Registering the AF point
You can register an AF point you use frequently.
1.Select the AF point to be registered. (p.97)
2.While holding down the <S> button, press the <Z> button.
•[
SEL HP :
If you change the C.Fn III
You cannot register multiple AF points.
C.Fn III
For AF point selection, you can enable or disable automatic selection. The setting before the slash (/) applies to the <5> dial’s function while the metering timer is active with C.Fn IV
0: 5direct:disable/6:enable
When metering is active, the <5> dial cannot select automatic selection. You can select automatic selection with <6>.
1:5direct:disable/6:disable Automatic selection cannot be selected.
2:5direct:enable/6:enable
When metering is active, the <5> dial can select automatic selection. You can select automatic selection with <6>.
224