Attaching and Detaching a Lens 
Attaching a Lens
1
Remove the caps.
Remove the rear lens cap and the body cap by turning them as shown by the arrow.
2 Attach the lens.
Align the red dots on the lens and camera and turn the lens as shown by the arrow until it clicks in place.
3 On the lens, set the focus mode 
switch to <f> (autofocus).
If it is set to <g> (manual focus), autofocus will not operate.
4 Remove the front lens cap.
Detaching the Lens
While pressing the lens release button, turn the lens as shown by the arrow.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the detached lens.
Do not look at the sun directly through any lens. Doing so may cause loss of vision.
The camera cannot be used with
39