3Custom Function Settings

C.Fn I -7 Spot metering link to AF point

0:Disable (use center AF point)

1:Enable (use active AF point)

If [8C.Fn III -10: Selectable AF point] (p.223) is set to [1: 19 points],

[2: 11points], [3: Inner 9 points] or [4: Outer 9 points], spot metering linked to the selected AF point is possible. With automatic AF point selection, spot metering will be at the viewfinder center.

If C.Fn III -10 is set to [0: 45 points], spot metering at the center will be set even if C.Fn I -7 is set to [1: Enable (use active AF point)].

C.Fn I -8 Safety shift

0:Disable

1:Enable (Tv/Av)

This works in the shutter-priority AE (s) and aperture-priority AE (f) modes. When the subject’s brightness changes erratically and the correct autoexposure cannot be obtained, the camera will change the exposure setting automatically to obtain a correct exposure.

2:Enable (ISO speed)

This works in the Program AE (d), shutter-priority AE (s), and aperture-priority AE (f) modes. When the subject’s brightness changes erratically and the correct autoexposure cannot be obtained, the camera will change the ISO speed automatically to obtain a correct exposure.

Even if the exposure settings settable range has been changed with C.Fn I -3,12,13, the safety shift will override it when necessary to obtain the correct exposure.

With settings 1 and 2, safety shift also works with flash.

C.Fn I -9 Select usable shooting modes

Disable: All the shooting modes (a, s, f, d, BULB) will be selectable.

Enable: Only the shooting modes set with [Register] will be selectable.

Register: To make a shooting mode unselectable, uncheck the checkmark <X>. After entering the settings, select [Apply].

210