Troubleshooting Guide
The file numbering does not start from 0001.
If you use a card which already has images recorded, the file numbering might start from the last image in the card (p.88).
The shooting date and time displayed is incorrect.
The correct date and time has not been set (p.49).
No image appears on the TV screen.
Make sure the stereo AV cable or HDMI cable’s plug is connected all the way in (p.170, 171).
Set the video OUT format (NTSC/PAL) to the same video format as the TV (p.170).
Use the stereo AV cable that came with the camera (p.170).
The voice memo cannot be played.
Set [8C.Fn IV
Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
If you selected [Clean nowf], the shutter will make a noise three times (p.184).
There are fewer printing effects than listed in the instruction manual.
What is displayed on the screen differs depending on the printer. This instruction manual lists all the printing effects available (p.194).
255