3Setting the Time Code

HDMI

Time code

You can append the time code to a movie that was output from HDMI. This is convenient for proxy editing after the movie output from HDMI is recorded to an external recording device (p.54). [On]: Time code is appended to the HDMI output image.

[Off]: Time code is not appended to the HDMI output image.

Recording command

When you record a movie that is output from HDMI to an external recording device, you can synchronize the camera’s movie shooting start/stop with the external recording device’s recording operation. [On]: Synchronize external recording device’s recording start/stop

with camera’s movie shooting start/stop.

[Off]: Control external device’s recording start/stop from external recording device.

If the movie-recording quality’s frame rate (p.54) and HDMI output frame rate are set manually to NTSC (60/30 fps) and PAL (50/25 fps) frame rates in a combination that does not function properly, the time code will not be appended to the HDMI output image.

For information on external recording devices compatible with [Rec Command], refer to Canon Web site, etc.

49