Troubleshooting Guide

A white icon or red Eicon is displayed.

This indicates that the camera’s internal temperature is high. If the white < > icon is displayed, still photo image quality may deteriorate. If the red <E> icon is displayed, movie shooting will soon stop automatically (p. 55).

Movie shooting stops by itself.

If the card’s writing speed is slow, movie shooting may stop automatically. See page 17 for the writing/reading speed required (Required Card Performance) for the respective movie-recording quality. To find out the card’s writing/reading speed, refer to the card manufacturer’s Web site.

Shoot a few test movies to see if movies can be recorded accurately with a movie-recording size you set (p.34) on the card.

The ISO speed cannot be set.

If the shooting mode is <d/s/f/BULB>, the ISO speed will be set automatically. In the <a> mode, you can freely set the ISO speed (p.24).

ISO 32000/40000/51200 cannot be set.

Under [z2: ISO speed settings], if [ISO speed range]’s [Maximum] is set to [51200/H] or higher, the manual setting range’s maximum will be expanded to enable ISO 32000/40000/51200 to be set. However, since movie shooting at ISO 32000/40000/51200 may result in substantial noise, the expanded ISO speed (“H” displayed) will be used.

70