Troubleshooting Guide

AF is not possible.

AF is not possible when Canon Log gamma is set.

If H, Ior A:8/7is set, AF is not possible in the fmode. Even if the AF mode is set to f, it will switch to dduring movie shooting.

The time code cannot be appended during HDMI output.

If the movie-recording quality’s frame rate setting is set to a value that does not function properly in combination with the NTSC/PAL frame rate, the time code will not be appended to the HDMI output image.

The HDMI output image has a temporary frame stop.

When the movie shooting ends, the HDMI output image pauses (frame stop). When writing to the card is completed, the movie is output normally.

Movie shooting stops if I connect or disconnect the HDMI cable.

If you connect or disconnect the HDMI cable during movie shooting, the movie shooting will stop. If you shoot movies while using HDMI output, you should use the provided Cable protector and clamp to prevent the cable from disconnecting accidentally.

74