Mirror Lock-up to Reduce Camera ShakeN

The camera’s mechanical shake caused by the reflex mirror action can blur images taken with a super telephoto lens or close-up (macro) lens. In such cases, mirror lockup is effective.

Mirror lockup is enabled by setting [8: Mirror lockup] to [1: Enable] in the [7Custom Functions (C.Fn)] (p.255).

1Focus the subject, then press the shutter button completely.

X The mirror will swing up.

2Press the shutter button completely again.

X The picture is taken and the mirror goes back down.

After taking the picture, set [8: Mirror lockup] to [0: Disable].

Shooting Tips

Using the self-timer <Q> <l> with mirror lockup.

When you press the shutter button completely, the mirror locks up, then the picture is taken 10 sec. or 2 sec. later.

Remote control shooting.

Since you do not touch the camera when the picture is taken, remote control shooting together with mirror lockup can further prevent camera shake (p.261). With Remote Controller RC-6 (sold separately) set to a 2-sec. delay, press the transmit button and the mirror will lockup before the picture is taken 2 sec. later.

In very bright light such as at the beach or a ski slope on a sunny day, take the picture promptly after mirror lockup.

Do not point the camera toward the sun. The sun’s heat can damage the camera’s internal components.

If you use the self-timer and mirror lockup in combination with a bulb exposure, keep pressing the shutter button completely (self-timer delay time + bulb exposure time). If you let go of the shutter button during the self-timer countdown, there will be a shutter-release sound, but no picture will be taken.

Even if <i> (Continuous shooting) has been set, single shooting will take effect. If 30 seconds elapse after the mirror has locked up, it will go back down automatically. Pressing the shutter button completely again locks up the mirror again.

122