CCreative Auto Shooting

(3) Drive mode/Flash firing

When you press <0>, the drive mode or flash firing setting screen will appear. Set as desired, then press <0> to finalize the setting and return to the Quick Control screen.

Drive mode: Press the <U> key or turn the <6> dial to set it as desired.

<u> Single shooting : Shoot one image at a time. <i> Continuous shooting:

While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to about 3.7 shots per sec.

<Q> Self-timer:10sec/Remote control :

The picture is taken 10 seconds after you press the shutter button. A remote control can also be used.

<q> Self-timer:Continuous :

Press the <V> key to set the number of multiple shots (2 to 10) to be taken with the self-timer. 10 seconds after you press the shutter button, the set number of multiple shots will be taken.

Flash firing: Press the <U> key or turn the <6> dial to set it as desired.

<a> Auto flash: The flash fires automatically when necessary.

<I> Flash on : The flash fires at all times.

<b> Flash off : The flash is disabled.

When using <j> or <q>, see the notes on page 89.

When using <b>, see “Disabling Flash” on page 55.

58