Custom Wireless Flash Shooting

Fully-automatic Shooting with One External Speedlite and Built-in Flash

This describes fully-automatic wireless flash shooting with one external Speedlite and the built-in flash.

You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject.

On the menu screens, the <0> and <1> icons refer to the external Speedlite, and the <3> and <2> icons refer to the built-in flash.

1

2

Select [CustWireless].

Follow step 5 on page 192 to select [CustWireless], then press <0>.

Select [Wireless func.].

For [Wireless func.], select [0:3], then press <0>.

3Set the desired flash ratio and take the picture.

Select [0:3] and set the flash ratio within 8:1 to 1:1. Setting a flash ratio to the right of 1:1 (up to 1:8) is not possible. If the built-in flash output is not enough, set a higher ISO speed (p.79).

The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop increments).

194