Installing and Removing the Battery

Installing the Battery

Load a fully charged Battery Pack LP-E8 into the camera.

1

2

Open the cover.

Slide the lever as shown by the arrows and open the cover.

Insert the battery.

Insert the end with the battery contacts.

Insert the battery until it locks in place.

3 Close the cover. Pressthe cover until it snaps shut.

Removing the Battery

Open the cover and remove the battery.

Press the battery release lever as shown by the arrow and remove the battery. To prevent short circuiting of the battery contacts, be sure to attach the protective cover (provided, p.26) to the battery.

After opening the battery compartment cover, be careful not to swing it back further. Otherwise, the hinge might break.

28