appears on the screen.

- The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed.

lights up in red.

-A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal.

-The memory card is full. Replace the memory card or delete some recordings ( 45, 72) to free some space on the memory card.

Even after stopping recording, the ACCESS indicator does not go off.

- The scene is being recorded in the memory. This is not a malfunction.

The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-second intervals).

- Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center.

The red ON/OFF (CHG) indicator flashes ( two flashes at 1-second intervals)

- The remaining charge of the battery pack is at least 50% of a full charge. This is not a mal- function.

The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2- second intervals).

- The temperature of the battery pack is outside the charging range. If the battery pack’s temperature is below 0 °C, warm it before charging it; if it is above 40 °C, let the battery pack cool down before charging it.

-Charge the battery pack in temperatures between 0 °C and 40 °C.

-The battery pack is damaged. Use a different battery pack.

appears on the screen.

-The LOCK switch on the Eye-Fi card is set to prevent accidental erasure. Change the position of the LOCK switch.

-An error occurred when trying to access control data on the Eye-Fi card. Turn the camcorder off then on again. If the icon appears often, there might be a problem with the Eye-Fi card. Contact the card manufacturer's customer care.

Picture and Sound

Screen displays turn on and off repeatedly.

-The battery pack is exhausted. Replace or charge the battery pack.

-Remove the battery pack and reattach it correctly.

Additional Information Š 101