Photos

Refer to this chapter for details on taking photos and playing them back.

Taking Photos

Operating modes:

POINTS TO CHECK

• Please read the IMPORTANT section before using an Eye-Fi card.

1 Turn on the camcorder.

By default, photos are recorded in the built-in memory. You can select the memory that will be used to record photos

( 31).

2 Press PHOTO halfway.

Once the focus is automatically adjusted, the onscreen icon will turn green and one or more AF frames will appear.

3 Press PHOTO fully.

The ACCESS indicator will flash as the photo is being recorded.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camcorder’s operating mode.

Photos Š 69