5 Press WEB .

6 Select () [Yes] and press .

• Press twice to interrupt the operation while it is in progress.

• The video from the point where you pressed WEB until the end of the scene (or up to 10 minutes in case of longer scenes) will be copied as a Web-friendly MPEG file.

7When the conversion is completed, a confirmation screen will

appear.

Press and repeat steps 3 to 6 to convert additional scenes or

continue with the procedure without pressing to upload your videos to the Web.

8Connect the camcorder to the computer using the supplied USB cable.

Connection 2 ( 77).

On the computer: Depending on the software you chose to install, Transfer Utility SD or VideoBrowser SD* will start up automatically.

9Computer: Click [Web upload] (Transfer Utility SD) or (VideoBrowser SD*) and continue the operation following the software's indications.

For details about using the software, click [Help] (Transfer Utility SD) or

(VideoBrowser SD*) to open the Software Guide (PDF file).

* only.

IMPORTANT

While the camcorder is connected to the computer, do not open the memory card slot cover and do not remove the memory card.

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the power source or turn off the camcorder or the computer.

External Connections Š 83