Move the zoom lever toward W (wide angle) to zoom out. Move it toward T (telephoto) to zoom in.
By default, the zoom lever operates at a variable speed – press gently for a slow zoom; press harder for faster zooms.
NOTES |
|
|
• Keep at least 1 m away from the |
|
|
subject. At full wide angle, you can |
|
|
focus on a subject as close as 1 cm. |
|
|
• While the advanced zoom is acti- | W Zoom out | T Zoom in |
vated, the field of view will be wider | ||
at full |
|
|
•You can set 
[Zoom Speed] to one of three constant speeds (3 is the fastest, 1 the slowest).
•When [Zoom Speed] is set to [
Variable], the zoom speed will be faster in record pause mode than when actually recording, except when 
50) is activated.
When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately
1 second*, allowing you to record the subject right away.
* The actual time required varies depending on the shooting conditions.
Operating modes: 
1With the camcorder on and in a recording mode, close the LCD panel.
A beep will sound and the green ON/OFF (CHG) indicator will change to orange to indicate the camcorder entered standby mode.
Video 37