Shooting - Letting the Camera Select Settings 41
Using the Built-In Flash

Use the built-in flash according to the guidelines below.

* No icon appears in the display panel in Auto mode.
1

Press the button to switch between

flash modes.

•The selected flash mode will show in the

display panel. It will also appear on the LCD

monitor if it is on.

2
Shoot the image.

•The flash will fire if the indicator beside the

viewfinder shines orange when the shutter

button is pressed halfway.

• Shooting procedures are the same as for the

Auto mode (p. 37).

Built-in Flash Settings

The flash cannot be used with some shooting modes.

(Auto) (Red-eye reduction,Auto)(Red-eye reduction,Flash on)(Flash on)(Flash off)
●
●
*
-
-
●
-
-
-
-
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
-
▲
▲
*
●
*
●
●
●
●
●
●
*
●
●
●
●
●
●
●
●
*
●
●
*
●
●
●
●
*
●
●
●
●
(Auto)*
(Red-eye reduction, Auto)
(Red-eye reduction, Flash on)
(Flash on)
(Flash off)
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp always fires but the flash only fires as
required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
* Default setting.
●
Setting selection is possible.
▲
Setting can only be selected for the first image.-Setting selection is not possible.