PHOTO Refer to Starting CameraWindow.
Using the software
1Power the camcorder with the compact power adapter.
2Set the camcorder to 
mode, in single photo view.
3Connect the camcorder to the computer using the supplied USB cable.
•Connection 4 . Refer to Connection Diagrams (
109).
•If the device selection screen appears, select [Computer/Printer] and press 
.
4Save the photos onto the computer.
PHOTO Refer to Downloading Still Images to the Computer.
IMPORTANT
•When the camcorder is connected to a computer:
-Do not open the memory card slot cover and do not remove the memory card.
-Do not access, change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data loss. Always save your recordings on the computer, and restore the files to the camcorder, using only the supplied software ImageMixer 3 SE.
•Operation may not work correctly depending on the software and the specifications/settings of your computer.
•If you wish to use the image files on your computer, make copies of them first. Use the copied files, retaining the originals.
•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
-Do not open the memory card slot cover.
-Do not disconnect the USB cable.
-Do not turn off the camcorder or the computer.
-Do not change the camcorder’s operating mode.
•When restoring to the camcorder video files that were previously saved to the computer, do not disconnect the USB cable or turn off the cam- corder or computer. Doing so may result in scenes that cannot be played back on the camcorder.
112 External Connections