•The time required to convert scenes is approximately equal to the

scene’s total running time. Because conversion generally takes longer on a computer, we recommend using the camcorder to convert scenes.

•You can play back the converted scenes from the [For Web (MPEG-2)] index screen on the memory card. Open the original movies index screen on the memory card, press INDEX SEL. and then select [For Web (MPEG-2)].

Connecting to the Computer and Uploading your Videos

If you are connecting the camcorder to the computer immediately after the conversion described in the previous section, start this procedure from step 3 below. Otherwise, start this procedure from the beginning.

1Power the camcorder using the compact power adapter.

2Open the [For Web (MPEG-2)] index screen on the memory card. Open the original movies index screen on the memory card, press INDEX SEL. then select [For Web (MPEG-2)].

3Connect the camcorder to the computer using the supplied USB cable.

•Connection 4 . Refer to Connection Diagrams ( 109).

•If the device selection screen appears, select [Computer/Printer] and press .

•On the computer, ImageMixer 3 SE will launch automatically and the startup screen (ImageMixer 3 Launcher) will appear.

4Click [Web upload] and continue the operation on the computer following the software’s indications.

•See also ‘ImageMixer 3 SE Software Guide’.

IMPORTANT

•While the camcorder is connected to the computer, do not open the memory card slot cover and do not remove the memory card.

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the power source or turn off the camcorder or the computer.

External Connections Š 127