2Pause the playback at the point you want to capture.

3Press PHOTO fully.

IMPORTANT

•When capturing photos on an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card ( 128).

NOTES

•The data code of the photos will reflect the date and time of recording of the original scene.

•Photos captured from a scene with a lot of fast movement may be blurred.

•/ Photos will be recorded on the memory selected for recording photos.

Protecting Photos

You can protect photos from accidental erasure.

Operating modes:

Protecting Single Photos

1In single photo view, open the photo selection screen.

FUNC. [ Protect]

[ Protect] appears on the screen.

2Select () the photo you want to protect.

3Press to protect the photo.

appears on the bottom bar and the photo cannot be deleted. Press

again to remove the protection.

4Repeat steps 2-3 to protect additional photos or press FUNC. twice to close the menu.

96 Š Photos